background image

8

2. Connect to the Storm3

2.1

Graphical User Interface

Storm3 contains a built-in graphical user interface 
(GUI), accessible by either Wi-Fi or a cable 
connection (figure 1). No special software is needed 
to access the user interface. All computers, laptops, 
tablets, smart phones, and other equipment 
containing either a Wi- Fi connection or a USB port 
can communicate with and configure Storm3. The 
Wi-Fi connection works automatically, whereas 
the device cable requires a one-time install of the 
communication driver on the PC or other device 
used to communicate with Storm3.

The startup sequence and the ‘Power’ and ‘Active’ LEDs detail what is happening internally on Storm3 
(figure 2). Upon applying power to Storm3, the Power LED will begin its regular five second blink pattern. 
Within a few seconds, the Active LED will turn on as well, showing solid initially, and then  blinking. When 
the blinking stops and the Active LED is no longer lit, Storm3 has completed its boot sequence and has 
entered its low-power sleep. The entire boot sequence typically completes within 30 seconds.

Figure 1: Storm3 Wi-Fi or cable connection ports

Figure 2: Storm3 Active and Power LED location

2.2

LED Indicators

Either the Wi-Fi adaptor or the USB device cable 
can be used any time after Storm3 has finished 
booting. Upon connection, the ‘Active’ LED will 
Blink Every few Seconds, indicating that Storm3 is 
awake and ready for communication.

Connect to the Storm3

Summary of Contents for YSI Storm3

















Reviews: