MOUNTING INSTRUCTIONS
NILE RADAR MOUNTING FLANGE
What’s In The Box
1
Thank you for purchasing the new WaterLOG Nile radar level sensor! This is the mounting instructions
for the Nile Radar Mounting Flange. For more detailed information regarding the Nile radar sensor
visit
www.waterlog.com/nile.
Please contact us at any time with your comments and feedback about
our products and services. We truly value your input.
Standard Items
Quantity
Nile Flange Plates (Symmetrical)
2
8-32 x 5/16 Screw
4
6-32 Set Screw
2
Hex Key
1
M4 x 18MM Screw
1
Remove Bolt
2
Please contact YSI customer service immediately if any
expected items listed are not in the box.
Remove the hex bolt and radar cone retaining clip
from radar housing as shown.
2
3
Remove Hex Bolt and Retaining Clip,
Assemble Flange
Nile Radar Sensor Mounting Flange Kit
1
Secure Screws
3
Mate the two symmetrical flange plates around the
narrow neck of the radar horn, and secure with four
8-32 machine screws.
Item # Nile FL
