Xylem YSI MultiLab 4010P-1, Operation Manual

Page: 18 / 108

Operation MultiLab 4010-1
18
ba76141e03 03/2014
4.1.4 Instrument connectors
4.1.5 Sensor info
You can display the current sensor data and sensor settings of a connected
sensor at any time. The sensor data are available in the measured value
display with the
<F1> /[ Info ] softkey.
1 IDS sensors: (pH, ORP, conductivity, D.O.)
2 USB B (device) interface
3 Stirrer (ProOBOD)
4 Service interface
5 Power pack
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current
circuit with current limiting).
YSI IDS sensors and IDS adapters meet these requirements.
1. In the measured value display:
Display the sensor data (sensor name, series number) with [
<F1> Info ].
1
3 4
5
2
25.0
7.007
pH
°C
0 14
01.02.2014
08:00
Info
USB output