Xylem YSI 2500, User Manual

Page: 8 / 98

3-1
3 Getting Started
Unpacking 3.1
When you unpack your new 2500 Analyzer for the first time, check the packing list to make sure you have received
everything listed. Note that reagents for the 2500 Analyzer are not packaged in the same carton as the instrument. If there
is anything missing or damaged, call the dealer from whom you purchased the 2500 Analyzer. If you do not know which of
our authorized dealers sold the system to you, call YSI Life Sciences Customer Service at 800 659-8895 or 937 767-
7241, and we'll be happy to help you.
1. After removing the instrument from the shipping box, tilt the display to the full upright position.
Figure 3-1
2. Grasp the hand hold in the right side cover of the instrument and pull up and out to remove the cover.
NOTE: Leave the cover off the instrument until you have aligned the sipper and installed the membranes as
described in the following sections.
3. Carefully cut the tie strap holding the sipper.
Figure 3-2
Remove tie strap