Xylem WTW TetraCon 925, Operating Manual

Page: 6 / 14

Measuring / Operation TetraCon
®
925 (/C)(-P)
6
ba75824e04 04/2015
Due to the use of high performance PEEK material for the connection
technology TetraCon
®
925/C has an improved chemical resistance,
especially in acid media (eg. As electroplating baths).
NOTE
Concentrated or strong oxidizing acids and organic solvents can
damage or destroy the sensor.
2 Measuring / Operation
2.1 Commissioning
Scope of delivery  Conductivity measuring cellTetraCon
®
925 (/C)(-P)
 Operating manual
Preparing the
sensor for
measurement
TetraCon
®
925(/C) Connect the sensor to the meter.
The sensor is immediately ready to measure.
TetraCon
®
925-P Connect the sensor to a free IDS sensor plug-in
position of the multi parameter probe or to an IDS
connection of the meter. To open and close the
IDS plug-in position please note the section 2.2
O
PENING AND CLOSING THE
IDS
PLUG CONNECTION
(T
ETRA
C
ON®
925-P).
The sensor is immediately ready to measure.
Connection cables in different lengths to connect
the TetraCon
®
925-P sensor to the meter are listed
in chapter 6 W
EAR PARTS AND ACCESSORIES
.