Xylem WTW Multi 3320, Operating Manual

Page: 80 / 106

Data memory Multi 3320
80
ba77053e04 07/2018
options:
 Switch directly to the measured value display with <M> .
 Quit the display and move to the next higher menu level with <F1> / [Back] .
11.3.2 Erasing the measurement data memory
Erasing the measurement data memory (see section 11.3.1 E
DITING THE
MEASUREMENT DATA MEMORY
, page 78).
11.3.3 Measurement dataset
A complete dataset consists of:
 ID number
 Date/time
 Measured values of the connected sensors
 Measured temperature value of the connected sensors or manually set tem-
perature
 AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no
AR indicator.
 Calibration evaluation: +++, ++, +, -, or no evaluation
11.3.4 Memory locations
The Multi 3320 meter has two measurement data memories. The measured
values recorded either manually or automatic are stored separately in indi-
vidual measurement data memories.
Data memory Maximum number of datasets
Manual data storage 500
Automatic data storage 5000