Battery operation with LS Flex/430
LS Flex/430
6
ba75968e02
11/2018
Connecting the LS Flex/
430
When the pHotoFlex LS Flex/430
is operated in the LabStation, a bar
code reader can be connected. A bar code reader enables to select
program numbers in a simplified manner.
Recommended bar code readers (see operating manual of your pHo-
toFlex).
For the interface of your meter, set the same baud rate that is set for
1
Open the battery compartment:
– Unscrew the two screws (1) on the underside of the meter,
– Remove the lid of the battery compartment (2).
2
If necessary, take four old batteries out of the battery compart-
ment.
3
Connect the cable of the rechargeable battery with the socket
(3) on the bottom of the battery compartment and insert the re-
chargeable battery in the battery compartment.
4
Close the battery compartment and fix it with the screws.
1
If necessary, replace the Euro plug (1) on the power pack (2)
by the country-specific plug suitable for your country.
2
Connect the plug (3) to the socket (4) of the LabStation.
3
Connect a PC, printer or bar code reader to the socket (5) of
the LabStation as necessary.
5
4
3
2
1
