Operation
DIQ/S 281
64
ba77244d01
08/2020
4.10 Info on software versions
The system informs you of the current versions of the software of the individual
components.
4.11 Software-Update for the DIQ/S 281 and sensors
With a Software-Update, you maintain the latest state of the instrument software
for the Universal Transmitter DIQ/S 281 and all active components.
The update packet with the current instrument software for active components
and detailed instructions on how to proceed are available on the Internet at
www.WTW.com.
1
Call up the measured value display with
<M>
.
2
Open the
Einstellungen/Settings
menu with
<S>
.
3
Using
<
>
, highlight the menu item,
Service
, and confirm with
<OK>
. The
Service
dialog window opens.
4
Using
<
>
, highlight the menu item,
List of all components
, and
confirm with
<OK>
.
The
List of all components
dialog box opens.
figure 4-12 List of all components
5
Exit the
List of all components
dialog box with
<M>
or
<ESC>
.
If the software version of a component is not up-to-date, you can
carry out a software update via the USB interface (see section 4.11).
