Xylem wtw CarboVis 701 IQ TS, Operating Manual

Page: 20 / 60

Commissioning
CarboVis 70x IQ TS
20 ba75950e03 05/2017
Zero adjustment Factory
User
Setting of which zero adjustment is
used in the sensor.

Factory zero adjustment or

Zero adjustment carried out last
Signal smoothing

On

Off
Switching on/off the signal smoothing.
For details, see
Response time t90
.
Response time t90
3 ... 60 min Response time of the signal smoothing.
Depending on the sample matrix, mea
-
sured values can vary more or less
strongly (e.g. due to foreign bodies or
air bubbles).
The signal filter (here, the
Response
time t90
)
reduces the limits of variation
of the measured values.
The
Response time t90
specifies the
time after which 90 % of a signal
change are displayed.
This menu item is only available with:
Signal smoothing
=
On
The specified time is used as a guide
value for low (10 min) to high (60 min)
signal smoothing and can deviate from
the value that was set.
Cleaning mode

On

Off
Switching on/off the automatic, time-
controlled cleaning function.
Cleaning type

Ultrasound

Air

Ultair
Cleaning methods / adjustment time
This menu item is only available with:
Cleaning mode
=
On
The duration of the cleaning procedure
with air is set in the menu item
Cleaning
duration Air
.
Menu item Settings Explanations