130
4.5.5
Sample identification
In the manual titration and in the preparation of solutions it is possible to input a sample identification (Fig. 93).
The possible input includes
manual
,
automatic
or
no
sample description at all.
Fig. 93
For a sample description of the «
manual
», a prompt for the sample description will always be displayed at the
start of the method (See also
For an «
automatic
» sample description there will be selected a master description (e.g. Fig. 94 in the current
case this is water), which will then automatically be numbered starting on 01.
Fig. 94
After a new power-up, numbering will resume with 01.
