14
Manual
US 3.10 713 FLOW CONVERTER 1905 - SW 833062
Electrical mounting
MJK 713 must not be connected to the power supply
before the ultrasonic sensor / pressure transmitter is
mounted and connected correctly.
MJK 713 is supplied from the mains on terminal
“0” and “P”.
Current regulations for conductor and fuse dimensions
should always be observed.
Remove the lid to gain access to the terminals.
Rela
y out 1
Rela
y out 2
Rela
y out 3
Rela
y out 4
Power
supply
Cur
ren
t output
(0 / 4 - 20 mA
)
Totaliz
er output
Standard cable length 40 ft.
(Can be extended to max.150 ft. using
MJK no. 690010 cable.
No. 1 = brown
No. 2 = red
No. 3 = orange
No. 4 = yellow
No. 5 = black
MJK 713 2500 Flowmeter
Ultrasonic Sensor
MJK 713 System Package 1
MJK 713 2500 with ultrasonic sensor
MJK 713 System Package 3
MJK 713 3000 with hydrostatic level transmitter
Note: 1: Conduit hubs are to beconnected to the
conduit prior to the connection to the enclosure.
2: Terminal tightening torque = 0.5 Nm.
Power
supply
No. 1 = red
No. 2 = brown
No. 3 = black
Pressure Transmitter
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
