TM
TM
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
INSTALLATION INSTRUCTIONS
KENT
STORAGE SYSTEM
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any
installation problems, please don’t hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new product and inspect for
damage.
The appearance of your shelf may differ from the illustrations in this guide. This instructions still apply.
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
10'
INSTALLATION INSTRUCTIONS
Handles come installed backwards. Remove handles and reinstall properly
on the front. Hand tighten the handles.
Carefully, turn the storage shelf over and place the base
onto the storage shelf.
Insert hex bolts into the holes in the corner of the bracket
of the base.
Secure the base to the storage shelf.
BASE INSTALLATION
Hex Bolt
Hex Wrench
Female Nut
Hex Wrench
