2
Beverage Dispense Pump
CAUTION:
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
Product Data
Specifications
Pump type
Positive displacement diaphragm pump
Pump electrical ratings
12VDC 2.5 Amps max
Power supply adapter
Input: 100-240VAC or 12VDC (BLC9-series) / Output: 12 VDC 3 Amp max
Flow rate
1.0 GPM (3.8 LPM) max
Pressure switch shut off
40 PSI (2.8 bar) max
Fluid contact materials
Polypropylene, EPDM, TPV, Stainless Steel
Ports included
1/4” (6.35 mm) OD Push Fit
Fluid types
(tested with water)
Water, soda, syrups, non-pulp juices, iced teas, wine, alcohol beverages < 15%, non particulate fluids,
max viscosity 100cP
Liquid temperature
34ºF (1.1ºC) - 120ºF (49ºC)
Net weight
1 lb (632 g)
Application
• Designed for dispensing Bag in Box beverages or Bottled
Water as indicated in Product Data Section
• Ideal for under counter installation
Special features
• Quick, simple, safe installation
• Compact size for easy mounting
• Easily accessible manual on/off switch to restart the pump
• Self priming
• Able to run dry without damage
• Quiet operation
• Built in timer prevents unit from running dry longer than 1
minute
• Built in shut-off automatically turns pump off after 5 minutes
to prevent inadvertant continous operation
Installation
Installation procedure:
– See Figure 1
1.
Connect suction hose (6.35 mm 1/4”) to BIB or Bottle.
2.
Connect supplied power adaptor into the DC plug on the back
of the BevJet Compact.
3.
Turn the ON/OFF switch located on the pump to the “ON”
position.
4.
Open discharge valve to prime pump, and purge all air from
the liquid line.
Operation:
– See Figures 1 & 2
CAUTION:
Do not place BevJet Compact into a
dishwasher as it will cause electrical failure of pump
and controls.
CAUTION:
To avoid exposure to freezing
conditions, prior to storing, cleaning and servicing
of pumps, purge all liquid from the pump. Allowing
water to freeze in the system may result in damage
to the pump and plumbing system.
WARNING EXPLOSION HAZARD:
Only
used with specified products. DO NOT PUMP
LIQUIDS WITH A FLASH POINT BELOW 100°F
(37.8°C) OR USE WHERE FLAMMABLE VAPORS ARE
PRESENT.
CAUTION:
The BevJet Compact must be installed
in an enclosure protected from any splash or spillage.
CAUTION:
Not intended for outdoor use.
BIB
Figure 1
Typical Beverage Installations
Summary of Contents for FLOJET BevJet Compact
Page 19: ......
