DRAFT
–
CONFIDENTIAL
–
NOT FOR DISTRIBUTION
5
5
Training and Qualifications
5.1 Requirements
The skills required to complete this work are:
•
Knowledge of electrical wiring and safety
•
Minor hardware installation (bolts and nuts)
6
Related Documents
Reference
Letter
Part Number
Description
Ref.A
Battery_cable_illustrated_drawing.
pdf
Diagram for battery cable connector
Ref.B
Chasqui_radar_connection_illustr
ated_drawing.pdf
Diagram for Telecom Board radar
connector
7
Safety
There are some potential hazards which could damage equipment or cause risk of injury.
•
Static discharge to electronic equipment
•
Battery discharge and fire
•
Pinching
•
Working near a confined space
7.1 Mitigating Risk when Servicing a Unit
Please review the following before attempting to service a unit
•
Inspect outside of enclosure for damage before attempting service. If the unit appears
physically damaged in any way, do not redeploy unit. Disconnect the battery if it is safe
to do so and contact your Xylem Representative to arrange for safe disposal.
•
Do not service the device while the radar is operating.
•
When servicing in the field, remove the radar from the manhole and move to a safe and
dry location before opening the enclosure.
•
Disconnect the battery from the electronic circuitry whenever the enclosure is opened.
•
Please read the remainder of this document and adhere to all requirements listed herein.
7.2 Battery Requirements
Caution
–
The battery used in this device may present a risk of fire or chemical burn if
mistreated. Do not disassemble, heat above 100C, or incinerate. Replace battery with
Vitzrocell SB-D024S+CON only. Use of another battery may present a risk of fire or explosion.
Caution
–
DO NOT attempt to charge the batteries. The batteries are primary cells and should
not be charged. Doing so risks potential fire or explosion.
8
Tools and Consumables
No special tools are required to service the radar.
The installer will be required to replace the tamper detection tag (consumable item) when
servicing the unit. The tags are supplied with the support bar installation kit and the support
