5.5 Set the night mode
If the night mode is active when the power is off, it is deactivated when the
power is turned on.
1. Select one of these operating modes 1, 2, 3, A, B, C, I, II, and III on the user
interface.
2. Press and hold the night mode button to activate the night mode.
The yellow light shows that the night mode is on.
The green light shows that the night mode is off.
WS012617A
3. Press and hold the night mode button to deactivate the night mode.
5.6 Reset the error
1. Disconnect the power supply to the pump.
2. Wait for 1 minute.
3. Turn on the power supply.
5.7 Connect a mobile phone to the pump
The MY ecocirc application is installed in the mobile phone.
1. Open the MY ecocirc application on the mobile phone.
2. Turn on communication via Bluetooth
®
wireless technology in the mobile
phone.
3. Press and hold the night mode button, on the user interface of the pump.
The LED light blinks shows that the pump is ready to connect.
WS012617A
5 Operation
20-18 Installation, Operation, and Maintenance Manual
23
Summary of Contents for Bell & Gossett Ecocirc+ 20-18
Page 1: ...Installation Operation and Maintenance Manual 671075208_2 0 Ecocirc 20 18...
Page 2: ......
Page 39: ......
