Xylem Bell & Gossett 4DWC Instruction Manual Download Page 5

• Personal accidents and health problems
• Damage to the product and its surroundings
• Product malfunction

Hazard levels

Hazard level

Indication

DANGER:
 

A hazardous situation which, if not avoided, will

result in death or serious injury

WARNING:
 

A hazardous situation which, if not avoided, could

result in death or serious injury

CAUTION:
 

A hazardous situation which, if not avoided, could

result in minor or moderate injury

NOTICE:
 

Notices are used when there is a risk of equipment

damage or decreased performance, but not

personal injury.

Special symbols

Some hazard categories have specific symbols, as shown in the following table.

Electrical hazard

Magnetic fields hazard

Electrical Hazard:
 

CAUTION:
 

1.4  Environmental safety

The work area

Always keep the station clean to avoid and/or discover emissions.

Waste and emissions regulation

Observe these safety regulations regarding waster and emissions:

• Appropriately dispose of all waste.
• Handle and dispose of the processed liquid in compliance with applicable environmental

regulations.

• Clean up all spills in accordance with safety and environmental procedures.
• Report all environmental emissions to the appropriate authorities.

Electrical installation

For electrical installation recycling requirements, consult your local electric utility.

1.5  Recycling guidelines

Always follow local laws and regulations regarding recycling.

1  Introduction and Safety

4DWC Three Phase Simplex Control Panel Instruction Manual

3

Summary of Contents for Bell & Gossett 4DWC

















Reviews: