Xycom XVME-653, Manual

Page: 38 / 113

XVME-653/658 Manual
3-4
IDE Adapter 0 Master and Slave Submenus
The IDE Adapter 0 Master and Slave submenus are used to configure IDE hard drive in-
formation. If only one drive is attached to the IDE adapter, then only the parameters in
the Master Submenu need to be entered. If two drives are connected, both Master and
Slave Submenu parameters will need to be entered. The Master and Slave Submenus
contain the same information.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
IDE Adapter 0 Master (C: 850 Mb) Item Specific Help
Autotype Fixed Disk: [Press Enter]
Type: [User] 850 Mb
Cylinders: [1647]
If the line item you are viewing
Heads: [ 16]
has specific help, it will be listed
Sectors/Track: [ 63]
here.
Write Precomp: [None]
Multi-Sector Transfers: [8 Sectors]
LBA Mode Control: [Enabled]
32 Bit I/O: [Disabled]
Transfer Mode: [Standard]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
&
Submenu F10 Previous Values
Figure 3-2 IDE Adapter Submenu