1341 Embedded Node PC Appendix B – Technical Specifications
19
144810(C)
Environmental Specifications
Table B-2 lists the environmental and compliance specifications for the 1341.
Table B-2. Environmental and Compliance Specifications
Temperature
Operating
Non-operating
0˚C to 50˚C (32˚F to 122˚F)
-20˚C to 60˚C (-4˚F to 140˚F)
Humidity
Operating
Non-operating
5% to 95% RH, non-condensing @ 40˚C
5% to 95% RH, non-condensing
Shock
1
Operating
Non-operating
15g peak acceleration, 11 msec duration
30g peak acceleration, 11 msec duration
Vibration (5-2000 Hz)
1
Operating
0.015” peak to peak displacement
2.5g maximum acceleration
1
These values are with solid state hard drives and not rotating media drives.
Appendix C – Watchdog Timer
C.1 Programming
The 1341 utilizes the ITE 8712 chipset as its watchdog timer controller. Below are the procedures to
complete its configuration and the AAEON initial watchdog timer program is also attached with which you
can develop a customized program to fit your application.
Configuring Sequence Description
After the hardware reset or power-on reset, the ITE 8712 enters the normal mode with all logical devices
disabled except KBC. The initial state (enable bit) of this logical device (KBC) is determined by the state of
pin 121 (DTR1#) at the falling edge of the system reset during power-on reset.
