Xxxlutz Dallas, Manual, Page: 15 / 97

Remote Control Operation
BUTTON FUNCTION ACTION & INDICATION
POWER
ON : Enables control panel functions and
remote control. Turns on flame effect.
OFF : Disables control panel functions and
remote control. Turns off flame effect.
1. Press once . Indicator light turns on.
Power turns on. All functions enabled.
2. Press again . Flame effect turns off.
Power and all functions turn off.
FLAME
FLAME “-” : Makes flame effect dimmer.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for heater to turn on.
3. Press once . Flame effect getsdimmer.
4. Press again until desired setting is
reached . Flame effect continues to
get dimmer each time button is
pressed.
FLAME
FLAME “+” : Makes flame effect brighter.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for heater to turn on.
3. Press once . Flame effect getsbrighter.
4. Press again until desired setting is
reached . Flame effect continues to
get brighter each time button is
pressed.
HEATER
HEATER button : Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
1.
2.
Press once . Indicator lights up.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
Press again . Indicator lights up.
High heater turns on and blows hot air.
3.
Press again.
Heaters turn off.
The fan blows cool air, then turns off.