XXL MCL6, Quick Reference Manual

Page: 9 / 12

Technical Specifications
Section
Technical Specifications Connections
MONO INPUT CHANNEL
Mic Input
sensitivity -10 a -50 dB XLR-F, balanced
impedance 2 Kohm
Line Input sensi20 a -20 dB TRS Jack, Bal/Unbalanced
impedance 10 Kohm
EQ HI ±15 dB @ 12KHz shelving
MID ±15 dB @ 2.5KHz peaking
LOW ±15 dB @ 80Hz shelving
STEREO INPUT CHANNEL
Mic Input
sensitivity da 0 a -50dB XLR-F, balanced
impedance 2 Kohm
Line Input sensitivity da +20 a -30dB TRS Jack, Bal/Unbalanced
impedance 10 Kohm
EQ HI ±15 dB @ 12KHz shelving
MID ±15 dB @ 2.5KHz peaking
LOW ±15 dB @ 80Hz shelving
MASTER SECTION
MASTER Nominal output level +4 dBu TRS Jack, Bal/Unbalanced
C. ROOM output Nominal output level +4 dBu TS Jack, Unbalanced
AUX 1 OUT Nominal output level +4 dBu TS Jack, Unbalanced
2-TRK OUT Nominal output level 0 dBu Rca Unbalanced
2 TRK IN Nominal input level. -10 dBv Rca Unbalanced
PHONES Minimum load impedance 32 ohm Jack Stereo
Maximum output level (2x) 193 Mw
DIGITAL EFFECT PROCESSOR
Preset HALL, ROOM, VOCAL e PLATE reverbs
STEREO DELAY
REV + DELAY
REV +CHORUS
GENERAL SPECIFICATIONS
Maximum Output Level – All O22 dBu
Crosstalk @1 KHz > 82 dBu
Signal/Noise ratio - unweighted < -93 dBu
THD + noise at +4dB, 1kHz < 0,008 %
Weight - net 1.4 Kg
Dimensions (LxAxP) 22.5 x 26.5 x 8.0 cm
POWER SUPPLY
AC SUPPLY 18 V AC 300mA. NOTE: USE ONLY THE INCLUDED AC/AC ADAPTER
Mains Supply Europe 230 V AC (±10 %) 50 / 60 Hz
Consumption 46 VA
Carisch S.p.A. reserves the right to modify products aspect and specifications at any time, without notice.
Please refer www.xxlinside.com for any further detail
Please refer to your XXL Dealer for your country rules about servicing.
©XXL 2013 – All rights reserved. Any not-approved copy and use, even partial, of this instruction manual and its texts, it’s
forbidden.