XX.Y BTT009, Manual

Page: 8 / 12

8
RX Mode
Pairing with Bluetooth devices
How to enter pairing mode
Function Operation
Entering pairing mode Make sure the receiver is off,
press and hold button for about
5
乣
7 seconds, and do not release
it until red and blue LEDs flashes
alternately
Note: The pairing mode will last 2 minutes. The receiver will
automatically switch to standby mode if no devices can be
connected within 2 minutes.
Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific
pairing steps may vary with different models of cell phones. Please
refer to your cell phone user’s manual for further information. The
general pairing steps are as follows:
1) Keep the receiver and Bluetooth cell phone within 1 meter when
pairing;
2) Enter the receiver’s pairing mode (refer to “How to enter pairing
mode”);
3) Activate your cell phone Bluetooth function and set your cell
phone to search for Bluetooth devices within range. After the
search is completed, select “BTT009” from the list of devices
shown;
4) According to the indication, enter password or PIN No:“0000”;
5) If prompted by your cell phone to connect, select “Yes”;
6) After successful connecting, blue LED of the receiver will flash
twice every 4 seconds.