manualshive.com logo in svg

XVision XPD721WIR, User Manual      L

Share
Download
XVision XPD721WIR User Manual      L Download Page 16

16

Specifications

Model:

XPD721WIR

Picture Type: 

Day/Night (B/W & Colour)

Image Sensor: 

Sony 1/3” Next Generation CCD

 DSP:

Xvision

Resolution: 

600 TVL (Colour mode)  
700 TVL (B/W mode)

Lens Viewing Angle: 

26 to 92°

Digital Zoom:

x32

Infra Red Night Vision: 

30 metres

Minimum Illumination: 

0 Lux (IR on), 0.0003 Lux (IR off)

Audio: 

No

Operating Voltage: 

12V DC 150mA, 300mA (IR on)

Suggested Power Supply: 

12V DC 1250mA

Mounting: 

Wall or Ceiling

Weatherproofing: 

Yes

Dimensions (WxHxD): 

150 x 130 x 150mm

Head Office

Xvision Group (UK)
Unit 2, Valley Point,  Beddington Farm Road, 
Croydon, Surrey CR0 4WP
E: [email protected]

Far East Office

Kyoung Am Building,  
157-27 Samsung-dong
Kangnam-ku, 135 090 Seoul, Korea
E: [email protected]

Manufactured exclusively for Xvision - www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local distributor.

LIMITED WARRANTY:

This product is supplied with a 3 Year warranty. The Warranty excludes products that have been 
misused, (including accidental damage) and damage caused by normal wear and tear. In the 
unlikely event that you encounter a problem with this product, it should be returned to the place 
of purchase.

Summary of Contents for XPD721WIR

















Reviews:

No comments

Brands by name

Popular brands

Load more brands