background image

3

The XPD721WIR dome camera is designed for high risk applications and is able to 
withstand a blow from a 120 pound sledgehammer. It offers very high resolution images of 
600 TVL in Colour mode and 700 TVL in B/W mode, with a low lux sensitivity of 0.0003 lux. 
It features Dynamic Night View, Number Plate Recognition, Wide Dynamic Range, Smart 
DNR for disk saving and an Auto Iris Varifocal Lens with 36x Optical Zoom. It is designed for 
internal or external use and can be wall or ceiling mounted. 

In addition to this the camera features high output LEDs for up to 30 metres IR night vision 
in complete darkness.  

 

z

700 TVL resolution images in B/W mode and 600 TVL in Colour.

 

z

Sony 1/3” Next Generation CCD Image Sensor with Xvision DSP.

 

z

2.8 to 11.0mm Varifocal Auto Iris Lens for 26 to 92° viewing angle for super sharp 
images and easy selection of the optimum viewing angle during installation.

 

z

Integrated Long Life Infra Red LEDs turn on automatically in low light conditions or 
complete darkness and provide up to 30 metres Night Vision.

 

z

Dynamic Night View technology provides clear images without the need for IR LEDs 
down to 0.0003 lux, this is achieved by using Field Integration. Please note due to the 
way in which field integration works, whilst it is in operation the frame per second will 
be reduced. The darker the scene, the lower the frame per second.

 

z

Smart DNR (3D Digital Noise Reduction) reduces the noise on the image when viewing 
in low lux environments (like at night). This reduces the size of the image when being 
recorded by a DVR, resulting in a saving of disk space.

 

z

D-WDR (Digital Wide Dynamic Range) feature allows the camera to display balanced 
pictures even when the scene being watched has bright spots or various light levels and 
back light conditions.

 

z

Number Plate Recognition using advanced Highlight Suppression Technology. 

 

z

Manual pan/tilt mechanism with 3-Axis Rotation.

 

z

Designed for Wall or Ceiling Mounting, suitable for Internal or External use.

3. Features

2. Product Description

Summary of Contents for XPD721W

















Reviews: