XVision XIP3000NVR, User Manual

Page: 10 / 60

- 9 -
2.2 Installing the Hard Disk Drive
1. Disconnect the power cable of the device.
2. Remove two screws on the rear
panel, and then remove the rear
panel.
3. Pull the bracket out from the disk bay.
4. Place the hard disk drive on the bracket, and then secured with two
screws.
NOTE While placing the hard disk drive onto the bracket, align the
screw holes on the bottom of hard disk drive with the studs
on the base of bracket. The two studs are designed to
ensure the hard disk drive will be installed on the bracket
securely.
5. Push the bracket into the disk bay all the way until it connects the
device.
6. Replace the rear panel and secure two screws.