XC960BN
HD
960H
5
www.xvision.com
1. Product Overview
2. Installation
The XC960BN camera can be wall or ceiling mounted. To install the camera, you will need to adjust the
bracket to the desired angle whether you would like it to be wall or ceiling mounted.
2. Place the installation stencil on the desired
installation area and drill through the stencil holes.
Then insert the wall plugs into the holes.
1. If placing the camera outside, you can screw the
rain shield on the top of the camera (Below) using
the flat head screw driver in the installation pack.
3. If you wish to run the cable through the wall
or ceiling, you will need to drill a hole in the wall/
ceiling for the wires to go through. If outside, you
can run the cable through the bracket as shown
below.
6. To turn the camera 180°, you will need to loosen
the screw holding the bracket to the camera.
5. To adjust the camera angle, loosen the bracket
of the camera with the allen key provided. It would
be advised to use a test monitor when choosing
the angle, to get the perfect angle for your
application.
4. When the holes have been drilled, put the
screws through the holes in the bracket and screw
into the wall.
