Network Video Server F Series Web Operation Manual
20
Figure 3-14 Schedule Time
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Please select a channel first.
Pre-record
Please input pre-record value here.
System can record the three to five seconds video before activating
the record operation into the file. (Depends on data size).
Storage
Event type includes:
Local storage: Storage record or image to the storage media.
Net storage: Storage recorded file or image to the remote server
via FTP. Please note, if you want to use this function, you need
to go to 3.2.5 Network->NAS to configure remote server IP and
corresponding information.
Emergency storage (Local).if you only enable net storage and
the net storage is abnormal right now, system can backup the
recorded file and image to the storage device.
Setup
In Figure 3-12, click set button, you can go to the corresponding
setup interface.
Please set schedule period and then select corresponding record
or snapshot type: schedule/snapshot, motion detection/snapshot,
and alarm/snapshot.
Please select date (Current setup applies to current day by default.
You can draw a circle before the week to apply the setup to the
whole week.)
After complete setup, please go back to Figure 3-12 and then click
save to save current time period setup.
Copy
It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in Figure
3-10.
Save
You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh
Click this button to get device latest configuration information.
3.2.4 RS232
