4. Adjust the camera viewing angle by first tilting (STEP 1) then rotating
the camera module (STEP 2), and then turn the horizontal adjustment
ring (STEP 3) to correct the image and achieve proper orientation (as
shown in Figure 2).
5. Place the dome cover on the camera and tighten it by turning it
clockwise.
1.
Connect the video output to the monitor or other video device
through a 75 Ohms type coaxial cable.
2.
Connect the audio output (optional) to the monitor or other video
device using the phono connection
3.
Connect the power source, insert the AC plug into the AC socket and
the DC plug into the DC Jack (+12V DC in jack centre).
4.
Once the picture appears on the monitor, open the cover and make
the Zoom Adjustment by rotating the screw (NEAR-Anti-clockwise,
FAR-Clockwise) until you get the desired view. Next make the Focal
Adjustment by rotating the screw (TELE-Anti-clockwise, WIDE-
Clockwise) until you get the desired view.
5.
Tighten the two screws, then replace the dome cover.
Audio Out
(to Monitor or other video device)
V
id
e
o Out
(to Monitor or other video device)
DC
P
o
w
e
r
(to
P
o
w
er
S
o
u
rce)
How to Operate
Ti
lt
Rotate
Camera
Module
Horizontal
Adjustment
Ring
4
5
Figure 2
