background image

CCTV

Model:

VIS238D

Colour Varifocal Dome
Camera

CCTV

Model:

VIS238D

Colour Varifocal Dome Camera

Manufactured exclusively for:

Xvision (Europe) Group,

Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local
distributor.

LIMITED WARRANTY:

This product is supplied with a 2 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
place of purchase.

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

CCTV

Model:

VIS249D

Colour 500TVL Varifocal
Dome Camera

CCTV

Model:

VIS249D

Colour 500TVL Varifocal Dome

Camera

Manufactured exclusively for:

Xvision (Europe) Group,

Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local
distributor.

LIMITED WARRANTY:

This product is supplied with a 3 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
place of purchase.

Before you begin

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor use only. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

8

Summary of Contents for VIS249D

Page 1: ...ng All types of cameras have difficulty in seeing with such a large lux level variation CCTV Model VIS249D Colour 500TVL Varifocal Dome Camera CCTV Model VIS249D Colour 500TVL Varifocal Dome Camera Manufactured exclusively for Xvision Europe Group Head Office London U K Email info x vision co uk Web www x vision co uk TECHNICAL SUPPORT For Technical Support for any Xvision product please contact y...

Page 2: ...ages from its Sony 1 3 Super HAD CCD sensor and has an Xvision Pixel Varifocal lens which allows easy selection of the optimum viewing angle required during installation It will provide images in light levels as low as 0 1 lux The camera is designed for internal use and for ceiling mounting Very High Resolution CCD sensor provides great quality Colour images in light levels of 0 1 lux and above Di...

Page 3: ...n the flickerless function flick the dipswitch to the F L position to turn it off flick the dipswitch to the OFF position 6 2 AGC Function For better performance in low light conditions the AGC Automatic Gain Control can be increased from the standard 16db to 26db This has the effect of making the picture brighter however it may also add more noise to the picture as it is amplifying all aspects of...

Page 4: ...the phono connection 3 Connect the power source insert the AC plug into the AC socket and the DC plug into the DC Jack 12V DC in jack centre 4 Once the picture appears on the monitor open the cover and make the Zoom Adjustment by rotating the screw NEAR Anti clockwise FAR Clockwise until you get the desired view Next make the Focal Adjustment by rotating the screw TELE Anti clockwise WIDE Clockwis...

Reviews: