1. Product Description
The TP12xxA features individually PTC fuse protected 2500mA, with
maximum output current limiting & over voltage protection. This well
designed unit is easy to install & provides a professional solution for power
distribution in all types of CCTV installation.
3. Installation
1.
Mount the Power Supply case at the required location. The case has clear
fixing hole locations, which are easily accessible.
2.
Ensure the local power AC is not live before any connection is made.
3.
Connect each camera to the individually protected outputs as desired.
2. Product Assembly
NOTE:
•
Green plug you removed to provide easy connection of cables.
•
Cables ties can be used to secure down the output cables to case
for protection of accidental pulled cables disconnecting.
4.
Remove the master AC input power fuse located top left.
5.
Now connect the AC input power colour coding which matches
local standards. Product is designed for direct ring mains
connection for the most secure power source, ideally a fused spur
would provide the best source for the AC power input for device.
Blue = Neutral, Green = Earth, Brown = Live
Left Side
Front Inside
Holes to fasten unit to wall
Push out metal to install PG
connectors if required.
Cable Tie lungs
Top View
Right Side
