4. The display has two power wires to be connected. Connect the
red wire (acces12V) to a wire that is energized when the
vehicles accessories is turned on. Connect the black wire to a
ground earth wire or to the body of the car using the steel of the
cars body behind the kick trim as an earth. In this case drill a
small hole and connect the wire using a suitable ring terminal.
Scrape off the cars paint around the hole to ensure good earth.
5. Connect the RCA cable to the RCA socket from the displays
loom.
1. Engage the park brake and turn the ignition key to the on
position.
DO NOT
start the vehicle.
2. Select reverse gear with the gear shift. The Mirror Display will
sense the video signal from the camera automatically and will
display the camera’s image of the rear of the vehicle.
6. INSTALLATION OF THE MIRROR DISPLAY
7. TESTING THE REVERSE CAMERA FUNCTION
7
Summary of Contents for XVMIRROR
Page 12: ......
