Blade
Micro Blade
Mini Blade
2. INSTALLATION CONT...
4
.
Locate a ground point near
the fuse box. There is usually
either an obvious labeled
ground point or a nut / bolt that
connects directly to chassis.
5
.
Decide whether you want
your device wired to a switched
or unswitched fuse. Switched
circuits only have power when
the vehicle is ON. Unswitched
circuits always have power.
You can verify if it’s switched or
unswitched using a simple
circuit tester. NOTE: Make sure
your vehicle is off and the key
is not in the ignition. Choose
your desired TAP fuse. Once
you select the desired TAP
fuse for your vehicle, attach to
the power cable using the
bullet connectors, then cover
with plastic sleeve.
4
