Maintenance
The 3D printer can continue to operate for a long time. For some long-time working
parts, especially some moving parts, it needs to be maintained. Here are some instruc-
tions on how to care for your machine：
1. Maintenance of X,Y,Z axis : Add some lubricants on the rods to reduce friction when
the machine works noisy and a little bit shake. Take a clean cloth, add some oil, and
slide it back and forth on the slidebar.
2. Filament are not easily pulled out from the extruder after being melted at high tem-
perature and cooled, and use iron wire to dredge outlet. Of course, we still recommend
that you empty the extruder as much as possible after the print job is finished. This is
also the basicmaintenance of the 3D printer.
3. Belt tightness: The tightness of the belt should be suitable, otherwise it will affect the
service life of the belt. The belt is too tight and the radial force of the motor axis and the
pulley is too large, which affects its service life. After the belt is installed, you can judge
whether the belt is too tight by turning the pulley. When the belt is pulled, if the belt
makes a loud sound, it means that the belt is too tight. If the belt is too loose, it will
cause transmission error and affect the printing effect. Test whether the belt is loose, you
can rotate the motor synchronous wheel in the opposite direction and positive direction.
If the moving distance of extruder before and after is not equal, indicating too loose;
you can also press the middle of the belt, if you gently press the belt arc is very
large,indicating that the belt is too loose; there is a test method is to download cylindri-
cal data,if one side is flat, it means that the shaft on this side is too loose.
Maintenance Service Regulations
1. This product executes regulations of “Product Warranty Card”.
2. Please contact supplier or customer service if the product have any problems . Do not
repair it by yourself, otherwise you need to bear allthe consequences.
Amazon support : suppor[email protected]
Ebay Support: [email protected]
Skype: XVICO
XVICO Facebook Group( XVICO 3D Printer Owners): https://www.facebook.com/groups/583066442160349
Website: www.xvico3d.com
Shenzhen Zhongxin Microscience Software Co.,Ltd
Summary of Contents for X3S
Page 1: ...X3S Operation instruction...
