2
FACE COVER INSTRUCTIONS
INSERTING FILTER INSERT INTO FACE COVER
Start with a fresh filter insert everyday. Remove filter insert prior to washing face cover.
Dispose of filter inserts properly after use.
1. Remove filter insert from wrapper.
2. Unfold filter insert by pinching both sides
and gently pulling.
3. Locate Right (“R”) and Left (“L”) labels on the
filter insert wings.
4. Slide each side under the band.
HOW TO WEAR YOUR FACE COVER
Wash your hands before putting on the face cover.
Use hand sanitizer, if soap and water are not available.
1. To connect your earbud holders and neck strap to your face cover, pull rubber beads away from
each other and fit each end of the earbud holder in between the beads and the ear loops. Then adjust to fit.
2. Cup the face cover in the hand allowing the ear loops and earbud holders to hang freely.
3. Pull the neck strap behind neck and earbud holders in front of neck.
4 Hold the face cover under the chin with the nosepiece facing upward.
5. Place one ear loop over the ear. Holding the face cover against the face with the other hand, place the
second ear loop over the ear. Adjust fit of the ear loops by sliding the bead on each side; closer to ear to
tighten and away from ear to loosen.
INSTRUCTIONS
Summary of Contents for XUPERFAB
Page 1: ...XUPERFAB USER MANUAL 1...
