6
Device Operation
1. Press the power button on
the rear of the light once for
high setting, twice for low
setting, and three times for
flash setting.
2. If a warmer light is desired,
place the colored filter over
the LED display.
Slide the 3.5 mm plug mount
onto the mounting rail and plug
it into the headphone jack of
the computer or smartphone.
Plugging the mount into a 3.5 mm
plug will not charge the light. It will
also not affect the operation of the
computer or smartphone.
Turning on the LED
Mounting the LED
Laptop or smartphone
If the headphone jack is on the
bottom of the phone, use the
included phone clip. Slide the
clip onto the LED’s mounting
rail. Then slide the clip over
the top of your phone with the
open side to the screen.
LED-200P Manual.indd 6
12/18/15 11:31 AM