4
Getting Started
1. Pull out the tab from behind the iPad
sleeve. Line up your iPad with the
sleeve, making sure that the front
and rear cameras line up with the
corresponding holes in the iPad case.
2. Insert the iPad into the sleeve
(Figure 3)
, and secure it by fitting
the tab between the iPad and
the case.
(Figure 4)
3.
To convert the case to a stand for
viewing and working, open the folio
so the iPad is at a right angle to the
keyboard.
4.
Pull the bottom of the iPad away
from the case, so it rests securely on
the area above the keyboard.
5. Remove the keyboard from the
case if you want to control the iPad
remotely, or if you want to pair the
keyboard with a different Bluetooth
device. You can use the keyboard
from up to 33 feet (10 m) away.
When replacing the keyboard in the
case, make sure to line it up with the
integrated magnets on the inside of
the folio.
(Figure 5)
Getting Started
Figure 3
Figure 4
Figure 5
When replacing the keyboard
in the case, make sure to fit
the tab behind the keyboard
to hold it in place.