8
6. Operation Test
HF200A works by press pneumatic supply of tire
changer. Connect tire changer with pneumatic
supply according to manual .
6.1
Leak check about pneumatic supply
6.2
Slide block check under 0.8-1MPA ,shock
and unsmooth is not allowed.
Pneumatic valve towards up, HF200A
towards up, too
The opposite is so. (fig E)
6.3 Parts flexibility check
7. Operation
HF200A, locking and dismounting tires conveniently, especially suitable for
low-profile and stiff tires, which make operation easier.
“ ! ” warning :
following parts should be installed plastic protectors before
operation : mounting head, lever, clamp and bead breaker.
“ ! ” warning :
please affirm whether the tire is equipped with sensor before
operation. If yes, please affirm model and position.
7.1
Loosen rim
If there is not sensor inside, separate outside tire and rim normally.
If there is sensor inside, operate according to its model and actual position. For
example, loosen from bilateral or loosen form inside separately.
“ ! ” warning :
Be careful! Forbidden pressing with bead breaker near sensor.
