WARRANTY
YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER
THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR
BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY. PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A
CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE
RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have
suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting
our customer service helpline above.
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: driver bits.
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
XU1
Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175
Input Voltage:
18V
Battery Capacity:
1.5Ah Li-Ion
Power Consumption:
27Wh
Tool Weight:
0.350kg
SPECIFICATIONS
CONTROLS
OPERATION
Battery Capacity Indicator
There are battery capacity indicators on the battery pack.
Check the charge capacity of your battery before use and
charge if necessary.
1. To check the battery capacity, press the button to the side
of the indicator LEDs.
2. Indicator Status:
- 3 lit LEDs: Battery fully charged.
- 2 lit LEDs: Battery 60% charged.
- 1 lit LED: Battery almost discharged.
Fitting the Battery Pack
1. Slide the battery into the base of the tool until it clicks into
place.
2. To remove the battery, press and hold the battery release
tab down then remove the battery.
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should
not be disposed of with household waste but
in an environmentally friendly way.
Please recycle where facilities exist. Check
with your local council authority for recycling
advice.
Recycling packaging reduces the need for
landfill and raw materials.
Reuse of recycled material decreases
pollution in the environment. Please recycle
packaging where facilities exist.
Check with your local council authority for recycling
advice.
PROPER USE
SETUP
This tool is intended for use in a DIY (Do It Yourself) context
or for hobbyist purposes. It is not built for continuous daily
use in a trade or professional capacity.
Before using the machine, carefully read these instructions,
especially the safety rules to help ensure that your machine
always operates properly.
Before attempting to operate the machine, familiarise
yourself with the controls and make sure you know how to
stop the machine quickly in an emergency.
Save these instructions and the other documents supplied
with this machine for future reference.
Charging Your Battery
1. Insert the power plug of the charger into the mains socket
outlet.
2. To charge the battery, slide the battery pack onto the port
in the charger. Make sure the release latch on the rear
of the battery snaps into place and the battery is secure
before charging.
3. Remove the battery from the charger once fully charged
by pressing the battery release latch and pulling the
battery pack from the charger at the same time.
4. Disconnect the charger from the power supply.
ALWAYS WEAR EYE, FACE AND
EAR PROTECTION
WARNING!
Ensure the tool is turned off and
disconnected from the power supply before
performing any of the following operations.