3mm gap is
the ideal tension
3mm gap is
the ideal tension
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LITHIUM
POWERED BY
18V LIT
HIUM
ION
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LITHIUM
POWERED BY
18V LIT
HIUM
ION
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
RUN
BRAKE ON
BRAKE OFF
STOP
18V LIT
HIUM
POW
ERED
BY
18V LIT
HIUM
POW
ERED
BY
RUN
BRAKE ON
BRAKE OFF
STOP
STRAIGHT
ARM
POSITION
CHAIN
LINE
LEFT HAND
CUTTERS
RIGHT HAND
CUTTERS
30°
30°
Voltage:
18V
Chain Speed:
4.3m/s
Bar Length:
254mm (10”)
Chain Pitch:
9.53mm (3/8”)
Oil Tank Capacity:
220ml
Battery:
1.5Ah Li-Ion
Charge Time:
3 Hours
Charger Input:
100-240V AC, 50-60Hz, 17W
Charger Output:
18V DC, 500mA
Tool Weight:
3.3kg
SPECIFICATIONS
5
PROPER USE
This tool is intended for use in a DIY (Do It Yourself)
context or for hobbyist purposes. It is not built for
continuous daily use in a trade or professional
capacity.
Before using the machine, carefully read these
instructions, especially the safety rules to help ensure
that your machine always operates properly.
Before attempting to operate the machine, familiarise
yourself with the controls and make sure you know
how to stop the machine quickly in an emergency.
Save these instructions and the other documents
supplied with this machine for future reference.
ASSEMBLY
WARNING!
Ensure the tool is turned off
and battery disconnected before performing
any of the following operations. Wear gloves,
blades are sharp.
WARNING!
Do not use any attachments
or accessories not recommended by the
manufacturer of this product, as it can result in
serious personal injury.
Fitting the Chain & Bar
1. Completely unscrew the side cover lock, in a
counter clockwise direction and remove the guide
bar cover
FIG. A
2. Fit the chain over the guide bar, making sure the
cutters are facing the direction of rotation.
FIG. B
3.
Place the guide bar and chain in position, ensuring
that the chain is around sprocket wheel
FIG. C
.
Also ensure that the chain tension pin
FIG. D
fits
into the guide bar. If it does not fit, it can be adjusted
slightly with the chain tensioning screw. The chain
must not slip off the bar when you do this.
4. Pull the guide bar forward until the chain is closely
seated. Make sure that all drive links are in the
groove of the guide bar
FIG. E.
WARNING!
Always be sure the tool is
switched off and the battery is removed before
carrying out any work on the tool.
WARNING!
Always wear gloves when
handling the chain as it is very sharp and can
cut you when it is not moving.
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
