Connections
Connect using
the correct
phase
Always connect using the correct phase, from the +-pole on the
amplifier to the +-pole on the loudspeaker and corresponding
for minus (-).
If you by accident connect the other way, there
is no risk of damage. However, the sound will
not be correct, especially in the lower
frequencies.
Alternatives for
connection
There are some different ways to connect a HiFi- or
Multichannel amplifier / receiver.
Please note! Be sure to not connect the
power cord until all signal connections
are made.
Amplifiers with
low level output
to XTZ W12S
Line In
Connect either a stereo or mono RCA lead to your output device
(surround decoder, TV, stereo receiver, etc) depending on
whether a stereo or mono output is provided. If stereo, connect
both RCA plugs into the subwoofer's RCA jacks. If mono,
connect the RCA plug into either of the input jacks. Then
connect the power cord to your
power outlet.
Amplifiers
without low
level output
A regular 2-conductor-cable is coupled from the (front) speaker
output on the amplifier to HIGH LEVEL IN (SPEAKER IN) on
the XTZ 99 W12. From this very same terminal, a regular cable
is coupled to the front speaker.
