background image

Sound settings

Room Tuning -
Mechanical 

adjustment of the 
boundary frequency

 

By using the supplied bass plugs in the bass reflex 
gates, you can alter the lower boundary frequency 

on the XTZ 99.36 MKII.

The level can be adjusted in 6 different levels in the 
bass range.

Also the treble level may be adjusted, which allows 

you to perfectly alter the sonic to fit the room, 
equipment and your own taste.

The speaker is parted in two bass reflex chambers, 

one for the midrange / woofer driver and one for 
the woofer. The uppermost gate is for the 

midrange/woofer while the two lowermost gates 
are for the woofer.

The figure below illustrates three basic settings.

Deep bass 

With one bass plugs in lower of the two lower gates 
you have the deepest possible bass, which may be 

suitable for smaller rooms.
This is under the condition that the bass level is set 

at mode 2 (+3dB)

"Quick" bass

Without bass reflex plugs in the gates, you have a 

"quick" bass which is especially suitable for large 
rooms where the lower frequencies often are ampli-

fied by the room. 

Neutral bass

With two plugs in two gates you have a flat fre-

quency response.

This is under the condition that the bass level is set 
at mode 1 (0dB)

This setting also depends on the size and 
shape of the room, and also on your own 
taste, so please has patience when trying 
out your prefered setting.

This schematic picture (which does not shown actual measured curves) elucidates the different sonic characteristics of the bass frequencies.

Page: 10

Summary of Contents for 99.36 MKII Walnut














Reviews: