- 8 -
Sound settings
Room Tuning -
Mechanical
adjustment of the
boundary frequency
By using the supplied bass plugs in the bass reflex
gates, you can alter the lower boundary frequency
on the XTZ 93 WMT shielded.
Also the treble level may be adjusted, which allows
you to perfectly alter the sonic to fit the room,
equipment and your own taste.
Closed gate
With the bass plug mounted in the bass reflex gate,
the cabinet is closed and the loudspeaker operates
as a closed construction. This yields a more ”tight”
bass reproduction.
Bass reflex
With no plug present in the gate you have a higher
bass level and the loudspeaker is capable of
handling lower frequencies.
These settings also depend on the size and
shape of the room, and also on your own
taste, so please have patience when trying
out your preferred setting.
Level adjustment -
Treble
The treble range can be adjusted to 2 different
settings.
Level adjustment in
the treble range
In the treble range the level is adjustable to two
different modes using the switch on the back of the
speaker.
Mode 1/ - 0dB
In this mode the sound is neutral with a flat
frequency response.
Mode 2/ -3dB
In this mode the treble level is decreased by -3dB.
Binding post
/Biwiring
1. Upper terminal + lower terminal (loops
present)
Default setting, the loudspeaker is fed
with the entire frequency range. In this mode, it
doesn't matter which connectors you use when
connecting the speaker cables.
Without the loop between upper and lower
terminal:
2. Upper terminal.
The signal is only fed to the
tweeter.
3. Lower terminal.
Now the signal is fed to the
woofer only.
PLEASE NOTE!! When the loops are
connected, ensure that all four contacts
are properly fastened so that the loops
connectors are stuck - if the loop falls of, it
may short-circuit between the + and -
contact and thus damage the amplifier.
