XTS XTS-SD20XDN2MP-WIP Series Quick Installation Manual Download Page 3

Page: 3 / 4

asdasd

DDD8880

8880 NW 18

Terrace Doral, FL 33172 USA T: 1.305.863.7779 F: 1.305.863.7478 TollFree: 1.855.797.8XTS

Brasil: 55.11. 7561.1089 Colombia: 571.610.0843 Mexico: 52.55.917.2118

Intelligent

Security

Solutions

4 Configure the Network Settings

The factory defaults IP address settings:

IP Address

192.168.1.2

Subnet Mask

255.255.255.0

Gateway

192.168.1.1

Run IPScan

5 Access IP Camera Web Interface

When accessing an IP camera using the web interface for the first time (or when the IP address changes), some configuration for ActiveX

controls are required.

1. Open an IE browser

2. Type in the IP address in the URL: http://<IP ADDRESS> (e.g. http://10.1.21.53)

Pop-up windows and messages for download/run Active X controls (examples below) will likely be displayed. Select

Install or Run to all such messages.

Summary of Contents for XTS-SD20XDN2MP-WIP Series

Page 1: ...0 0843 Mexico 52 55 917 2118 Intelligent Security Solutions XTS SD20XDN2MP WIP Series Quick Installation Guide Install IPScan on a Windows PC IPScan is a utility used to configure network settings for...

Page 2: ...cover lid and remove the protective camera packaging WARNING Powering on the camera without removing packaging may damage the camera 5 Insert the mini SD card if applicable Remove the internal black p...

Page 3: ...192 168 1 2 Subnet Mask 255 255 255 0 Gateway 192 168 1 1 Run IPScan 5 Access IP Camera Web Interface When accessing an IP camera using the web interface for the first time or when the IP address chan...

Page 4: ...ayed in IE 6 Adding the Camera to an NVR System Please refer to the NVR instructions and firmware User s Manual for additional details To add the 8180 to an NVR using RTSP protocol specify the camera...