background image

20

19

Troubleshooting

If you have problems operating this product, refer to this section. The most common 
problems are listed below, along with likely causes and solutions.

- Car engine has not been started. Start the car engine. 
- Incorrect wiring connection. Check the wiring. 
- Fuse has been damaged. Replace fuse.

- Parking brake wire connect is incorrect. Check the parking wiring. 

- The disc is inserted upside down. Insert the disc with the label upward.
- The disc is dirty. Clean the disc.
- The disc is cracked or otherwise damaged. Insert a normal, round disc.
- The files on the discs are in an irregular file format. Check the file format.
- The disc format cannot be played back. Replace the disc.
- The loaded disc is a type this product cannot play. Check what type of disc it is.

- The parking brake lead is not connected or applied. Connect the parking brake 
lead correctly, and apply the parking brake.
- The parking brake interlock is activated. Park your vehicle in a safe place and apply 
the parking brake.

- Volume is too low. Adjust volume.
- Incorrect wiring connection. Check the wiring. 

No power

- Video DVD settings do not match with the DVD. Adjust video DVD settings. 
- Video connection is incorrect.

No sound

No image

Disc does not play

The screen is covered by a caution message and the video cannot be shown

Image flashes or distorted

- Set the TV Signal settings (NTSC/PAL) of the iPod/iPhone correctly.

- The Bluetooth reception is poor. Move the mobile phone closer to the product or 
remove any obstacle between the mobile phone and the product.
- Some mobile phones may connect and disconnect constantly when you make or 
end calls. This does not indicate any malfunction of the product.
- For some mobile phones, the Bluetooth connection may be deactivated 
automatically as a power-saving feature. This does not indicate any malfunction of 
the product.

- Signals are too weak. Select other stations with stronger signals. 
- Check the connection of the vehicle antenna.
- Change broadcast from stereo to mono.

Noise in broadcasts

The paired mobile phone connects and disconnects constantly

Preset station lost

- Battery cable is not correctly connected. Connect the battery cable to the terminal 
that is always live.

The iPod/iPhone’s video image is disturbed

Summary of Contents for PF7146BS













Reviews: