Xtrons PDAB Series, User Manual

Page: 10 / 26

1.2 Brake Set
On: Video images cannot be viewed while your vehicle is in motion.
Off: Video images can be viewed while your vehicle is in motion.
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in
motion. To view video images, stop in a safe place and apply the parking
brake.
1.3 Beep
On: Sounds a beep.
Off: Does not sound a beep.
1.4 Auto Enter GPS
If you turn this on , the navigation will work automatically after the unit is
powered on.
1.5 OSD Time ON
If you turn this on, the time will be displayed on the upper right side of the
screen while you are watching DVD.
1.6 Camera Mirror
If you connect a rear view camera (sold separately) to the unit, you can turn this on
to enter mirror imaging mode for rear parking, and turn this off to enter normal
imaging mode for rear parking.
1.7 Black Time (Screen Timeout Settings)
Choose from 3 minutes, 5 minutes, 10 minutes, and cancel.
1.8 Backlight Set
Drag the slider to adjust the Day Backlight and the Night Backlight.
1.9 TCH Cali (Touch Calibration)
Tap the center of “+” on the screen, and move along with the center of “+” so as to
calibrate the screen. Tap OK to save the data and exit.
1.10 Steer Key
This allows you to use the steering wheel control of your vehicle to control the unit.
1.11 GPS Info
This displays GPS receiver information. You can set the time zone.
1. General settings
1.1 Any Key Power
On: You can turn on the unit by pressing any button on the panel next time.
Off: You can turn on the unit by pressing the power button only.
Settings
17 18