Click“ ” icon on the main UI to enter into the setup interface
1
、
Click“ ”in the carset interface,and then click“
”to
enter into steering wheel setting interface.
2
、
At first,press “ ”button to remove all old datas.
3
、
Set the buttons as tips on the screen.Note:when prompt press
button the wheel,pls hold 0.5s-1s,cannt relax too early.
4
、
Press“ ”button to save the settings after the setup completed.
5
、
When setup errors need to be reset,pls repeat above 2-4 operation.
6
、
Some cars with CAN-BUS neednt set steering wheel,pls ignore
this part.
Note:make sure”button wire”on the steering wheel connected well with”SWC”
on the unit,as shown below:2 CSW wire connected with anode of steering wheel
button wire,GND conneted with cathode
Steering wheel button settings
