Xtrons D10 Instruction Manual Download Page 6

Page: 6 / 11

1. OPEN BUTTON

Press it to detach the removable faceplate.

- 5 -

2. VOL + / VOL-

Press it to adjust volume level.

3. PWR BUTTON

Press it to turn on the unit. Press it again to turn off.

4. MUTE BUTTON

Press it to mute down sound. Press it again to release this mode and

recover previous volume level.

5. SEL BUTTON & VOL + / VOL-

Press to cycle the audio mode through volume,bass,treble, balance,and fader.

Use the VOL+/VOL- buttons to adjust the selected mode.When the mode has
not been adjusted for several seconds the display returns to the radio or CD
display.

A.Volume

: Adjust volume level by using Vol+ / Vol- buttons.

Note: The unit is initially set to volume mode.

B.Bass:

Press SEL button once. Adjust the bass level by using Vol+ / Vol-

buttons.

C.Treble:

Press SEL button twice. Adjust treble level by using Vol+ /

Vol- buttons.

D.Balance:

Press SEL button three times. Adjust sound balance between

left and right speakers by using Vol+ / Vol- buttons.

E.Fader:

Press SEL button four times. Adjust sound balance between front

and rear speakers by using Vol+ / Vol- buttons.

F.EQUALIZER

G.LOUD ON/OFF
H.VOL
I.DX/LOC
J.REG ON/OFF

6. LOC BUTTON(FOR REMOTE)

Press LOC button on the front panel or on the remote controller for
distance reception when you are located at weak signal location. Depress it
for stronger signal.

7. MO/ST BUTTON(FOR REMOTE)

Press it to select STEREO or MONO.

8. BND/TA BUTTON

Press repeatedly in radio mode to cycle bands between:

- 16 -

C A R M O B I L E E N T E R TA I N M E N T

This is to select Treble or Bass
according to your needs.

This is to let the user set Brightness,
Contrast, Hue and Saturation of the

picture by pressing the arrow left/right
button.
Press Enter button to confirm to
change the OSD display on the
television screen.
Note: Only on TV/AV mode, the Video
setup is available. When DVD
playback, the picture setup is
unavailable.

a. BRIGHTNESS

optical output signal of the unit will be
the same as the digital signal (RAW
format) of the playing disc. At the
same time, the power amplifier you
connected must have the decode fu-
nction of Dolby Digital, DTS or MPEG.

3) SPDIF/PCM:
When the player is connected with the
2 channel, digital stereo amplifier,
please select this item; when the pla-
ying disc which is recorded by Dolby
Digital or MPEG recording system, the
analog or optical output will be mod-
ulated to 2 channel output by PCM.

-2

-4

KEY

AUDIO OUT

KEY

D. VIDEO SETUP

This setup page includes all the items
for VIDEO. The details please refer to
VIDEO SETUP MENU.

d. SATURATION

b. CONTRAST

BRIGHTNESS

HUE

SATURATION