61
The gateway for Smart Linux TV
User Manual
VIII. Universal Remote Control
The universal remote control allows you to operate the most important functions such as power on/off and volume
control on your television, audio-video receiver, or DVD player. To be able to control the device, you must adapt
the remote control to the device first.
1. Setup method
1-1. Initial Settings
A. Device Default: STB
B. Remote Control Default Setting Code
1) STB: 001
2) TV: 001
3) DVD: 001
4) AUX: 001
1-2. Settings method
A. 3-DIGIT Setup Method
1) Turn on the device that you want to setup (for example turn on TV)
2) Press and hold [DEVICE] + [OK] button more than 2 seconds until the device LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to normal
mode.
3) Enter the 3-Digit setup code from the Brand list. (The LED will blink by Key input)
When the 3-Digit setup code is input, the designated Power Code will be output. (LED blinks)
Verify whether it operated properly by pressing the [Power] button. (If the device does not operate
properly, press next 3-Digit setup code)
In case the 3-Digit setup code is not valid, the LED will off for 1.5seconds and revert to on status for input
mode.
It does not answer against key input other than [OK], [0~9], [CH+], [CH-], [Power] key.
4) Press [OK] button to save and exit the setup model. (LED will blink 2 times and off)
B. Auto Search (CH+, CH-) Setup method
1) Turn on the device that you want to setup (for example turn on TV)
2) Press and hold [DEVICE] + [OK] button more than 2 seconds until the device LED blinks.
If there is no key input for 20secnds, the Remote Control will exit the setting mode and return to normal
mode.
3) Press [CH+] or [CH-] button. By pressing the button, the power code of next setting number will be output.
(LED blinks)
It does not answer against key input other than [OK], [0~9], [CH+], [CH-], [Power] key.
4) Press [OK] button to save and exit the setup model. (LED will blink 2 times and off)
