9
EXERCISE MONITOR
SPECIFICATIONS:
TIME (TMR) -------------------------------------------------------------------------00:00~99:598MIN
SPEED (SPD) ----------------------------------------------------------------------0.0~99.9KM/H(ML/H)
DISTANCE (DIST)-----------------------------------------------------------------0.00~999.9KM(ML)
PULSE -----------------------------------------------------------------------------60~220BPM
CALORIE (CAL)--------------------------------------------------------------------0.00~9999KCAL
ODOMETER (IF HAVE) ---------------------------------------------------------0~9999KM OR ML
KEY FUNCTIOINS:
MODE:
This key lets you to select and lock on to a particular function you want.
PAUSE:
Press to start or stop the operation of functions. *(IF HAVE)
SET:
The
key allows you to choose a target value for TIME, DISTANCE, CALORIES.
PRESET:
Reset the value to zero by pressing the key.
OPERATION PROCEDURES:
1. AUTO
ON/OFF
◆
This system turns on when any key is pressed or when it receives an signal input from the
speed sensor.
◆
The system turns off automatically when the sensor has no signal input of no key are
pressed for approximately 4 minutes.
2. RESET:
The unit can be reset by either changing battery or pressing the mode key for 3 seconds.
3. HOW TO PRESET TIME, DISTANCE, ODOMETER, PULSE & CALORIES:
Press the MODE key until the function brand, which is going to be preset is flashing.
Press the MODE key once the function brand stop flashing.
Choose the value you want to exercise by the SET key.
When the speed sensor has any signal input, the monitor will begin to count down.
It will beep for 10 seconds to indicate the completion of workout which is preset. Press any key to
stop beeping.
If no data is preset, the function data will count up.
4.FUNCTIONS:
1.
TIME:
The time of exercise will be displayed by pressing MODE key until brand TMR appear.
2.
SPEED:
Current speed will be shown by pressing MODE key until brand SPD appear.
3.
DISTANCE:
The distance of each workout will be displayed by pressing MODE key until brand
DST appear.
4.
ODOMETER:
Press the MODE key until the pointer advances to ODOMETER. The total
accumulated distance will be shown.
5.
CALORIE:
The calories burned will be displayed by pressing MODE key until brand CAL appear.
6.
PULSE:
User’s current heart rate is displayed in beats per minute (BPM) by pressing MODE
key until brand PULSE appear. Place the palms of your hands on both of the contact pads and
wait for 30 seconds for the most accurate reading.
SCAN:
Automatically display of the following functions in the order shown:
TIME-SPEED-DISTANCE-ODOMETER (if have) -CALORIE-PULSE
