FILTER RE-ASSEMBLY INSTRUCTIONS
WARNING
RE-INSTALLING
ILOWHUHOHPHQWFOXVWHUDVVHPEO\
1.
Lubricate outlet elbow O-rings
Replace filter element cluster into filter tank, carefully
fitting top collector manifold outlet over outlet elbow O-ring.
CLEAN SEAL RING AND SEAL SURFACE
5HPRYH¿OWHUWDQNVHDO
:LWKDFOHDQFORWKZLSHWKHORZHU¿OWHUERG\VHDOVXUIDFHDQG
clean seal of all dirt and debris. (Fig 4) Do not use a solvent.
:LWKDFOHDQFORWKZLSHWKHXSSHU¿OWHUERG\VHDOVXUIDFH
1RWLFH'RQRWXVHDQ\SHWUROHXPVROYHQWVWRFOHDQ¿OWHU
components.
'RQRWOXEULFDWHVHDO
WARNING
This product should be installed and serviced only by a
TXDOL¿HGSRROSURIHVVLRQDO
BODY AND CLAMP RE-ASSEMBLY
1.
Place the metal reinforced seal on lower
¿OWHUERG\)LJ3ODFHXSSHU¿OWHUERG\
RQPHWDOUHLQIRUFHGVHDODQGORZHU¿OWHU
body in a position which allows all
operation and safety labels to be clearly
YLVLEOHDQGWKHXSSHU¿OWHUERG\WREH
FHQWHUHGRQWKHORZHU¿OWHUERG\3UHVV
GRZQ¿UPO\DQGHYHQO\RQWKHXSSHU¿OWHU
body to seat the seal. (Fig 7)
5HSODFHWKH¿OWHUFODPSDURXQGWKHXSSHU
DQGORZHU¿OWHROGWKHFODPSHQGVWRSRVLWLRQWKHFODPSRQWKH¿OWHUERGLHVZLWKWKHFODPSHQGV
DGMDFHQWWRWKHVDIHW\DQGRSHUDWLRQODEHOVRQWKH¿OWHUERGLHV)LJ
3. Insert clamp bolt through the clamp ends and thread the clamp nut onto clamp bolt with rounded end of the
nut (Fig 8) towards the ends of the clamp.
1HYHUUHO\RQKDQGWLJKWHQLQJRIFODPSQXWWRFODPSEROW8VLQJD´VRFNHWRQDWRUTXHZUHQFKWRUTXH
clamp nut to clamp bolt to 150 inch-lbs. (Fig 9)
DO NOT HIT OR STRIKE CLAMP WITH HAMMER OR METAL TOOLS.
)ROORZ2SHUDWLRQ,QVWUXFWLRQVIRU³6WDUWLQJWKH3XPSDQG)LOWHU6\VWHP´3DJH
VACUUMING POOL
9DFXXPLQJFDQEHSHUIRUPHGGLUHFWO\LQWRWKH¿OWHUZKHQHYHUQHHGHG
Backwash filter after vacuuming
, if required.
DRAIN
PLUG
LOWER
FILTER
BODY
ALIGN
LABELS
Figure 7
Clamp bolt
Rounded end of nut
Figure 8
7LJKWHQFODPS
EROWDQGQXW
using a
WRUTXH
ZUHQFKWR
LQFKOEV
Figure 9
