8
the Dock wIll allow You to Power anD charge
Your IPoD/IPhone/IPaD whIle transmIttIng
over Bluetooth
1. Remove the dock, back support, screw and AC adapter
from the packaging and properly dispose of any packaging
materials.
2. Place unit on a level surface close to a power outlet following
the precautions listed in the safety warnings.
3. Place the back support with the tall edge facing outward on
the top of the dock aligning the center slit over the screw hole.
4. Place the screw over the slit and align with the hole on the
unit. Gently tighten about half way by turning the screw
clockwise. The back support should be able to slide to the
front and back loosely.
5. Carefully place your device into the dock connector and slide
the back support to fit snuggly against your device.
6. Gently tighten the screw all the way to secure the back
support into place.
7. If located in the US, skip to step 10. If located outside the US,
select the appropriate wall adapter. If already attached to the
unit, skip to step 10.
8. Press the button under the wall adapter to release the adapter.
9. Gently slide in the appropriate wall adapter. You will hear a
click when it is properly locked into place.
10. Connect the AC adapter jack to the back of the unit and then
connect the other end of the adapter to a power outlet.
3
1
2
4
1. Dock connector
2. Back support
3. Screw
4. AC power jack
Ouput power 5V
2.1A
